LIVE AREA MEASURE
Live area: Is considered the area that you see from a graphic once it is installed on the frame.
Measure from inner side of the outer tab of the extrusion on both sides
In this case the measure of the LIVE AREA is 875”
GROOVE / CHANNEL / SLOT MEASURE
GROOVE / CHANNEL/ SLOT MEASURE
Groove measure is very important, it is needed to define the thickness of the silicone to be used with the graphic.
To achieve a good fit inside the channel considering the silicone, the fabric and the stiches, but most important to avoid using a silicone that is wider than the slot, up to the point that the graphic can’t be installed
In this case the measure of the GROOVE is 1563” or 5/32”
